Satake are Australia's feed mill engineering and construction experts.

Complete plant engineering is Satake's domain. Whether it be for livestock feeds, poultry or aquaculture, Satake has the technology and engineering support to build your solution.

Satake know that the correct storage and handling of raw materials is vital in any successful feed milling operation. 

We provide solutions for product receiving, transfer and storage. 

Our intake systems are designed to quickly and safely unload the incoming vehicle, transfer the product to the storage system and then accurately discharge to the onward process.

We can provide weighing systems, pre-cleaners and stock level control systems within the intake and storage package.  

Satake's high capacity cleaning equipment ensures that the feed produced is consistent, hygienic and to the best possible quality standards. 

Satake provide equipment for separation by:

- Size
- Shape
- Specific gravity
- Air resistance
- Special peculiarity (e.g. magnetic)

Satake manufacture high quality, energy efficient hammer mills for the coarse grinding of poultry and livestock feeds and the fine grinding of meals for aqua feed. 

Our hammer mills are used in a variety of industries for grinding organics and minerals. 

Our Sydney offices have facilities for test grinding products to determine performance and capacities of client provided samples.

Hammer milling is also used for the size reduction of organic materials to be used in bio-ethanol processing. Satake have adopted special equipment and design models to ensure that the equipment we supply suits these very high capacity applications. (more)

The Satake FHRA Batch Mixer is designed to mix all free flowing dry solids encountered in the stock feed, pet food, flour milling, food and chemical industries. 

The Batch Mixer will accurately homogenise macro and micro ingredients in a rapid cycle time and when fitted with special features will also blend in small volumes of liquid. (Datasheet)

Satake have constructed some of the largest pelleting plants in Australia and New Zealand. 

Pelleting reduces the volume of bulk products and make transport, storage and end-use easier to manage. It can also improve the enzyme activity and compared to mash feed, pellet feed can increase the feed conversion rate by 10% to 20%.

Satake pelleting system can be used in many industries and for many products. The products that we handle include cereals, pulses, spent grains, wood and other organic materials. 

We also hold a compressive inventory of pellet press dies in stock for immediate delivery.

The Satake Pellet Crumbler is used to reduce pellets produced on a press to “crumbles”. The pellets are ground between two fluted rolls that are fully adjustable allowing accurate particle size reduction. (Datasheet)

The Prater/Satake Pellet Sieve has evolved from over 70 years experience of the Prater Industries Incorporated Group of Companies in Chicago, USA.
Satake Australia manufactures this well proven unit under licence to Prater Industries.

The sieve is also capable of duties other than pellet screening where scalping and sizing of coarse and fine particles are required. (Datasheet)

Satake can engineer and supply bulk out loading systems for pellets, flakes, mashes and flours. 

Our design can include dust control systems, weighing, product traceability systems and vehicle movement controls. 

FCKJ plants are used for various small and medium sized feed mills, poultry, livestock farms and aquaculture farms. The plants can produce both pellet and mash feed. 

The plant integrates all the equipment required necessary for in-process handling, grinding, mixing, pelleting, cooling, screening, lifting and conveying, electric control, etc.

The FCKJ Modular feed Mill provides a complete solution for low investment and quick returns. (Datasheet)